Disassembly
CYLINDER HEAD ASSEMBLYDISASSEMBLY
NOTE: Identify MLA, valves and valve springs as they are removed so that each item can be reinstalled in its original position.
1. Remove MLAs (A).
2. Remove valves.
1) Using SST (09222-3KOOO, 09222-3C300), compress the valve spring and remove retainer lock.
2) Remove the spring retainer.
3) Remove the valve spring.
4) Remove the valve.
5) Using SST (09222-29000), remove the valve stem seal.
NOTE: Do not reuse old valve stem seals.
3. Remove OCV (A).
For inspection procedures after disassembly, please refer to Testing and Inspection. Testing and Inspection