Headliner: Service and Repair
HEAD LINING1. To remove the headlining, first remove the following parts:
1. Rear seat cushion.
2. Rear seat back.
3. Rear seat belt upper anchor mounting bolt.
4. Rear seat back lower side bracket.
5. Quarter inner trim.
6. Front seat belt upper anchor mounting bolt.
7. Center pillar upper trim.
8. Front pillar trim.
2. Remove the mounting screws from the over head console lamp.
Disconnect the over head console lamp.
3. Remove the mounting screws from the sunvisor.
4. Remove the mounting clips from the roof rear cover trim.
5. Remove the headlining mounting clips and remove the headlining.
6. Installation is the reverse of removal.