Trunk / Liftgate Latch: Service and Repair

Replacement

Latch Assembly Replacement
1. Remove the tailgate trim.
2. After loosening the mounting nuts, then remove the latch assembly (A).
3. Disconnect the connector.
Bolt, 0.7 - 1.1 kgf.m (6.9 - 10.8 N.m, 5.1 - 8.0 lbf.ft)




4. Installation is the reverse of removal.

NOTE:
- Make sure the connector is connected properly and the connecting rod is connected properly.
- Make sure the tailgate opens properly and locks securely.