Cluster Facia Replacement

Replacement

Cluster Facia Replacement

NOTE:
- When prying with a flat-up screwdriver, wrap it with protective tape, and apply protective tape around the related parts, to prevent damage.
- Put on gloves to protect your hands.

1. Tilt the steering column down.
2. Separate the cluster facia panel (B) from the crash pad pulling the SST (A) (09840-1E100).




3. After loosening the mounting screws, then remove the cluster fascia (A).




4. Disconnect the connector (A).




5. Installation is the reverse the removal.

NOTE:
- Make sure the connector is plugged in properly.