Front Wiper Motor

Removal

1. Remove the windshield wiper arm and blade after removing a nut (A).




2. Remove the weather strip and the cowl top cover (A) after removing 5 retainers.




3. Remove the windshield wiper motor and linkage assembly(A) after removing 3 bolts. Disconnect the wiper motor connector (B) from the wiper motor & linkage assembly.






Installation

1. Install the wiper motor and linkage assembly and then connect the wiper motor connector.

TORQUE :7-11Nm (0.7-1.1, kgf.m, 5.0-7.9 lbf.ft)


2. Install the cowl top cover.
3. Install the windshield wiper arm and blade.

TORQUE :28 - 33 Nm (2.8 - 3.3 kgf.m, 20 - 23.1 lbf.ft)


NOTE:
- The windshield wiper motor must be cycled to make sure that it is in the park position.
If necessary, adjust the wiper arm and blade.