Radiator Cooling Fan Motor: Service and Repair

Removal

1. Disconnect the battery negative cable
2. Loosen the drain plug and drain the engine coolant.
3. Remove the air duct (A).




4. Remove the radiator upper hose (A) and lower hose (B).








5. Disconnect the ATF cooler hoses (A).




6. Disconnect the fan motor connector (A).
7. Remove the radiator & condenser mounting bolt (B).




8. Remove the radiator & cooling fan assembly from the vehicle.

Installation

1. Installation is reverse order of removal.
2. Connect the fan motor connector.
3. Install the radiator upper hose & lower hose, and connect the ATF cooler hoses.
4. Fill the radiator with coolant and check for leaks.