Oil Filter: Service and Repair

Oil Filter Assembly

Removal

1. Remove the water temperature control assembly.
2. Remove the intake manifold.
3. Wait for 5 minutes after loosening the oil filter cap to drain well the oil in the oil filter.




4. Remove the oil filter body.






Installation

1. Install the oil filter body.

Tightening torque :
9.8 - 11.8N.m (1.0 - 1.2kgf.m, 7.2 - 8.7lb-ft)






CAUTION:
- All rubber gaskets must not be damaged by assembling parts.
- Always use a new O-ring (C) and oil seal (B).




2. Install the intake manifold.
3. Install the water temperature control assembly.