Front Lower Arm

Replacement

Replacement the lateral arm.
1. Remove the front wheel & tire.

Tightening torque:
90 - 110N.m (9.0 - 11.0kgf.m, 65 - 80)


2. Loosen the flange bolt & lock nuts.

Tightening torque:
140 - 160N.m (14.0 - 16.0kgf.m, 101 - 116lb-ft)





3. Disconnect the lateral arm (C) with the front strut assembly (D) by loosening the flange bolts (A) & lock nuts (B).

Tightening torque:
140 - 160N.m (14.0 - 16.0kgf.m, 101 - 116lb-ft)






CAUTION:
Do not use the lock nuts again.

4. Remove the split pin and castle nuts.

Tightening torque:
90 - 110N.m (9.0 - 11.0kgf.m, 65 - 80)





5. Disconnect the lateral arm (A) with the front knuckle using a SST (09568-2J100).









Replacement the tension arm.
1. Remove the split pin and castle nuts.

Tightening torque
Tie rod : 90 - 110N.m (9.0 - 11.0kgf.m, 65 - 80lb-ft)
Tension arm : 90 - 110N.m (9.0 - 11.0kgf.m, 65 - 80lb-ft)





2. Disconnect the tension arm (A) with the front knuckle using a SST (09568-2J100).








3. Disconnect the tension arm (A) with the frame by loosening the flange bolts & lock nuts.

Tightening torque:
140 - 160N.m (14.0 - 16.0kgf.m, 101 - 116lb-ft)









4. Installation is the reverse of removal.