Repair procedures

Removal

1. Pull the shift lever knob (A) upward to remove.




2. Remove the center console. (refer to Console in DS group)
3. Disconnect the sport mode connector (A).




4. Disconnect the wire (A) for the airbag assembly.




5. Take off the clip (A) and remove the shift cable assembly (B).




6. Remove the shift lever assembly (A) by removing the four bolts.




7. Remove the shift cable assembly from the transmission (refer to Transmission Removal)
8. Pull the rubber plug on the floor and pull out the shift cable assembly.

Installation

1. Insert the shift cable assembly and place the rubber plug on the floor.
2. Install the shift lever assembly (A) by tightening the four bolts.

Tightening torque :
9 - 14 Nm(0.9 - 1.4 kgf.m, 6.51 - 10.12 lb-ft)





3. Install the shift cable assembly (B) and insert the clip (A).

CAUTION:
Place the waving shape end of the shift cable upward.




4. Install the shift cable assembly to the transmission (refer to Transmission Installation)

CAUTION:
Check that the shift cable is installed properly referring to 'How to adjust the shift cable'.

5. Connect the wire (A) for the airbag assembly.




6. Connect the sport mode connector (A).




7. Install the center console. (refer to Console in DS group)
8. Insert the shift lever knob (A) with the specified force.

Specification :
2.2 - 3.6 N (22 - 36 kgf, 48.5 - 79.4 lb)