Wipers/Washers - Wiper Blade Replacement
Group BODYNumber 09-BE-010
Date JUNE, 2009
Model GENESIS SEDAN (BH)
WIPER BLADE REPLACEMENT
DESCRIPTION:
This bulletin provides instructions on how to gain access to replace the wiper blades on the (BH) Genesis Sedan.
VEHICLES AFFECTED:
Model: GENESIS SEDAN (BH)
SERVICE PROCEDURE:
1. Push the Engine Start/Stop button two (2) times to the ignition (IGN) on position. Do not start the engine.
2. Press the Engine Start/Stop button once to turn the vehicle off. Within 2-5 seconds - push up and HOLD the wiper stalk in the "MIST" position.
3. The wiper arms will move and hold in the up position. At this position the wiper blades can be replaced.
4. After replacing the wiper blades, turn the vehicle "ON" by pressing the Engine Start/Stop button two (2) times (do not start the engine) and push up on the wiper stalk "MIST" button once and release. The wiper arms will move back to the lower position.
NOTE:
Before replacing the wiper blades, please make sure to clean windshield from any dirt or foreign material.