Scantool Diagnostics

Monitor Scantool Data

1. Engine "ON".
2. Connect scantool to Data Link Connector (DLC).
3. Start and drive vehicle in gear and maintain vehicle speed is approx. 50 km/h or more (31 mph or more)
4. Monitor the "WHEEL SPD SENSOR-RL" parameter on the Scantool.

Specification : Approx. 50 km/h or more (31 mph or more)





Fig 1) Test Condition : Drive vehicle in 50 km/h or more. (31 mph or more)
Normal Data
Fig 2) Test Condition : Drive vehicle in 50 km/h or more. (31 mph or more)
Normal wave
5. Is parameter displayed within specifications ?