Scantool Diagnostics

Monitor Scantool Data

1. Park the vehicle on a level surface.
2. Connect 'TPMS exciter' or scantool to Data Link Connector (DLC).
3. Select "TPMS DIAGNOSIS" mode.
4. Select the "FULL" mode of "CURRENT DATA" function.
5. Monitor the parameter of RF RSSI background on the 'TPMS exciter' or scantool after 9 minutes.

Specification : "RSSI background" is less than 1.9V





Fig 1) Sensor current data (normal)
Fig 2) Connect the DLC for 'TPMS exciter'
6. Is parameter within specifications ?