Scantool Diagnostics

Monitor Scantool Data

1. Park the vehicle on a level surface.
2. Connect 'TPMS exciter' or scantool to Data Link Connector (DLC).
3. Select "TPMS DIAGNOSIS" mode.
4. Select the "FULL" mode of "CURRENT DATA" function.
5. Monitor SENSOR 3's temperature parameter on the 'TPMS exciter' or scantool after 4 minutes.

Specification : Less than 230 °F (110 °C)





Fig 1) Sensor current data (normal)
Fig 2) Connect the DLC for 'TPMS exciter'
6. Is parameter within specifications ?