Body - Body Dimension Information

Group: BODY

Number: 08-BD-015

Date: DECEMBER, 2008

Model: SONATA (NF)

Subject: 2009 SONATA BODY DIMENSIONS

DESCRIPTION:
This TSB provides the body dimension information for the 2009 Model Year Sonata. Similar information is available from frame alignment equipment suppliers, such as Chief Automotive Systems.

1. All measurements in this manual are taken with a tracking gauge.

2. When a measuring tape is used, confirm there is no elongation, twisting or bending.

3. For measuring dimensions, both projected dimension and actual-measurement dimension are used in this manual.

MEASUREMENT METHOD:

PROJECTED DIMENSIONS





1. These are the dimensions measured when the measurement points are projected into the reference plane, and are the reference dimensions used for body alterations.

2. If the length of the tracking gauge probes are adjustable, make the measurement by lengthening one probe by the amount equivalent to the difference in height of the two surfaces.

ACTUAL-MEASUREMENT DIMENSIONS





1. These dimensions indicate the actual linear distance between measurement points, and are the reference dimensions for use if a tracking gauge is used for measurement.

2. Measure by first adjusting both probes to the same length. (A=A')

CAUTION:
Check the probes and gauge itself to make sure there is no free play.

MEASUREMENT POINT





1. Measurements should be taken at the hole center.





FRONT BODY A





BODY DIMENSIONS FRONT BODY A





FRONT BODY B





BODY DIMENSIONS FRONT BODY B





SIDE BODY





BODY DIMENSIONS SIDE BODY





INTERIOR A





BODY DIMENSIONS INTERIOR A





INTERIOR B





BODY DIMENSIONS INTERIOR B





REAR BODY





BODY DIMENSIONS REAR BODY





UNDER BODY (PROJECTED DIMENSIONS)





BODY DIMENSIONS UNDER BODY(PROJECTED DIMENSIONS)





UNDER BODY(ACTUAL MEASUREMENT DIMENSIONS)





BODY DIMENSIONS UNDER BODY(ACTUAL-MEASUREMENT DIMENSIONS)