Rear Assist Arm

Removal

1. Loosen the wheel nuts slightly.
Raise the rear of the vehicle, and make sure it is securely supported.
2. Remove the rear wheel and tire from rear hub.

CAUTION:
Be careful not to damage the hub bolts when removing the rear wheel and tire.

3. Remove the assist arm mounting bolt (A) from the rear axle assembly (C).




4. Remove the assist arm mounting bolt (B) from the cross member (D).

Installation

1. Install the assist arm mounting bolt (B) to the cross member (D).

Tightening torque :
110 - 120N.m (11 - 12kgf.m, 79.5 - 86.8lb-ft)





2. Install the assist arm mounting bolt (A) from the rear axle assembly (C).

Tightening torque :
140 - 160N.m (14 - 16kgf.m, 101.2 - 115.7lb-ft)


3. Install the wheel and the tire to the rear hub.

Tightening torque :
90 - 110N.m (9 - 11kgf.m, 65.1 - 79.5lb-ft)


CAUTION:
Be careful not to damage the hub bolts when installing the rear wheel and tire.