Repair Procedures

Removal

1. Remove the trailing arm mounting nut(A) from the rear knuckle.





NOTE:
After removing the head lamp leveling link(A), remove the right trailing arm.




2. Remove the trailing arm mounting nut(B) from the body.
3. Remove the trailing arm(C).

Installation

1. Place the trailing arm(C) as shown below.




2. Install the trailing arm nuts.

NOTE:
Fully tighten the trailing arm mounting nuts with the vehicle on the ground in unloaded condition.

A. Install the trailing arm mounting nut(A).

Tightening torque :
140 - 160N.m (14 - 16kgf.m, 101.2 - 115.7lb-ft)

B. Install the trailing arm bracket mounting nut(B).

Tightening torque :
140 - 160N.m (14 - 16kgf.m, 101.2 - 115.7lb-ft)

NOTE:
After installing the right trailing arm, install the head lamp leveling link(A).