W/Harness Inspection

Airbag

Airbag Control - B1493 PODS (Passenger Occupant Detecting System) Communication error - W/Harness Inspection

Terminal and Connector Inspection

1. Many malfunctions in the electrical system are caused by poor harness and terminals.
Faults can also be caused by interference from other electrical systems, and mechanical or chemical damage.
2. Thoroughly check connectors for looseness, poor connection, bending, corrosion, contamination, deterioration, or damage.
3. Has a problem been found?






CAN COMM' LINE Inspection

1. Ignition "ON" & Engine "OFF" and Using a scan tool, clear the DTC.
2. Ignition "OFF".
3. Disconnect the battery negative cable, then disconnect the positive cable, and wait at least one minutes.
4. Disconnect the PODS MODULE from the PODS wiring harness.
5. Disconnect the SRSCM from the PODS wiring harness.
6. Measure resistance between terminal 5 or 10 of the CAN COMM wiring connector and chassis ground.




7. Is DTC present problem?