Monitor Scantool Data

Transmission

Automatic Transaxle - P0741 Torque Converter Clutch Circuit Performance or Stuck Off - Monitor Scantool Data

Monitor Scantool Data

1. Connect scantool to data link connector (DLC)
2. Engine "ON".
3. Select "D RANGE" and drive vehicle
4. Monitor the "TORQUE CONVERTER (DAMPER) CLUTCH" parameter on the scan tool.

Specification : TCC SLIP < 160 RPM (In condition that TCC SOL. DUTY > 80%)




Fig 1) Normal status
5. Are "TCC SOLENOID DUTY and TCC SLIP" within specifications?