Monitor Actuation Test

Brake

Electronic Stability Control - C2374 Electronic Shuttle Valve Secondary (HSV2) Error - Monitor Actuation Test

Monitor Actuation Test

1. Connect scantool to Data Link Connector (DLC)
2. Ignition "ON" & Engine "OFF".
3. Select the "Actuation Test" mode on the scantool.
4. Inspect operating status of ESC (ESP) valve #2 with Actuation Test.

Specification : It's normal if operating sound is heard.




Fig.1) Test Condition : Ignition "ON" & Engine "OFF".
Ex) Actuation Test on ESC (ESP) valve #2
5. Does a ESC (ESP) valve #2 operate normally?