Component Inspection

Immobilizer

Immobilizer - P1695 Immobilizer-EMS Memory Error - Component Inspection

Component Inspection

1. Check transponder and ECU status
(1) IGN "ON" & Engine "OFF"
(2) Monitor the "KEY STATUS", "SMARTRA STATUS" and "ECU STATUS' Parameter on the Scantool.

Specification : 'LEARNT'




Fig.1) The current data in normal state
(3) Are "KEY STATUS", "SMARTRA STATUS" and "ECU STATUS' Parameter within specifications?





2. Check PCM
(1) IGN "ON" & Engine "OFF"
(2) Neutralize ECM and Register transponder key by scantool.

NOTE:
Pin code is required to Neutralize ECM and to Register transponder key

(3) Are Neutralizing and Registering completed normally?