Scantool Diagnostics

Brake

ABS/ESC - C2370 TC Valve Secondary (USV2) Error - Scantool Diagnostics

Monitor Actuation Test

1. Connect scantool to Data Link Connector (DLC)
2. Ignition "ON" & Engine "OFF".
3. Select the "Actuation Test" mode on the scantool.
4. Inspect operating status of TCS (USV) valve #2 with Actuation Test.

Specification :It's normal if operating sound is heard.




Fig 1) Test Condition : Ignition "ON" & Engine "OFF".
Ex) Actuation Test on TCS (USV) valve #2
5. Does a TCS (USV) valve #2 operate normally?