Component Inspection

Transmission

Automatic Transaxle - P0741 Torque Converter Clutch Circuit Performance or Stuck Off - Component Inspection

Component Inspection

Check Torque Converter Clutch Solenoid Valve
1. Connect scantool to data link connector (DLC)
2. Ignition "ON" & Engine "OFF".
3. Select A/T Solenoid valve Actuator test and Operate Actuator test.
4. Can you hear operating sound for using TCC SOLENOID VALVE Actuator Testing Function?





Check Oil Pressure




1. Connect Oil pressure gauge to "DA" port.
2. Engine "ON".
3. After connecting Scantool and monitor the "TCC SOLENOID VALVE DUTY" parameter on the Scantool data list.
4. Operate vehicle with 3rd or 4th gear and operate the "TCC SOLENOID VALVE DUTY" more than 85%.

Specification :Oil pressure gauge approx 735.4960 KPa (7.5 kg/cm2)-(In condition that TCC SOL. DUTY > 85%)

5. Is oil pressure value within specifications?