Rear Door Panel: Service and Repair

Replacement

Door Trim Replacement

NOTE:
- Take care not to scratch the door trim and other parts.
- Put on gloves to protect your hands.

1. After loosening the mounting screw, then remove the inside handle cover (A).




2. Loosen the door trim (A) mounting screws. Release the clips that hold the door trim, then remove the door trim by pulling it upward.




3. Disconnect the connector (A).




4. Installation is the reverse of removal.

NOTE:
- Make sure connectors is plugged in properly and each rod is connected securely.
- Make sure the door locks and opens properly.