Repair Procedures

Replacement

Floor Console Replacement

NOTE:
- When prying with a flat-up screwdriver, wrap it with protective tape, and apply protective tape around the related parts, to prevent damage.
- Put on gloves to protect your hands.

1. Remove the knob (A).




2. Remove the console under cover (B).




3. Disconnect the connector (C).




4. After loosening the mounting screw, then remove the center fascia lower panel (A).




5. Gently detach the hook, remove the parking brake cover (A).




6. After loosening the console mounting screws, then remove the floor console assembly (E).




7. Disconnect the connector (B).




8. Remove the console side cover (A).




9. After loosening the mounting screws, then remove the front console (A).




10. Installation is the reverse of removal.

NOTE:
- Make sure the connector is plugged in properly.
- Replace any damage clips.

Console Extenser Cover
1. Remove the console assembly.

Driver`s





Passenger`s




2. Installation is the reverse of removal.