Component Inspection

Immobilizer
P1692 Immobilizer Indicator Lamp Error - Component Inspection

Visual/Physical Inspection

Check immobilizer lamp circuit
1. Ignition "ON" & Engine "OFF".
2. Check if immobilizer lamp operates properly.

NOTE:
Right after ignition "ON", Immobilizer lamp lights up for 30 sec.
If lamp blinks 5 times after ignition "ON", a fault exists in immobilizer system.

3. Is the immobilizer lamp operating properly?






Component Inspection

Check immobilizer lamp.
1. IG KEY OFF.
2. Connect SMARTRA connector and disconnect PCM/ECM connector
3. Ground indicator terminal of PCM/ECM harness connector with wire.
4. IG KEY ON & Engine "OFF".

Specification : Immobilizer lamp "ON"








5. Is the Immobilizer lamp "ON"?