Repair Procedures

Removal

1. Remove the crash pad garnish.

2. Remove the center fascia panel(A) with loosening screws.




3. Remove the connector(A).




4. Remove the audio head unit(A) with loosening 4 screws.




5. Remove the audio with disconnecting audio connectors and antenna cables(A).





NOTE:
If the CD does not eject, do not attempt to remove it because the audio unit may be damaged. Contact an authorized dealership for assistance.

Installation

1. Connect the audio unit connectors and cables.
2. Install the audio unit.
3. Install the center fascia panel.
4. Install the crash pad garnish.
5. Connect the battery(-) terminal.

NOTE:
Make sure the audio head unit connectors are plugged in properly and the antenna cable is connected properly.