Repair Procedures

Inspection

1. Check the audio remote control switch for resistance between connector 3 and 4 in each switch position.




[Audio (Left)]





[Audio (Right)]





[Bluetooth (Left)]






Removal

1. Disconnect the negative (-) battery terminal.
2. Remove the driver airbag module.

3. Remove the steering wheel.

4. Remove the steering wheel cover (A) after loosening the screws.








5. Disconnect the steering wheel remote control switch connector(A) after loosening screws.

[Audio (Left)]





[Bluetooth (Right)]






Installation

1. Reassemble the steering wheel remote control switch after connecting the connector.
2. Reassemble the steering wheel.
3. Reassemble the driver airbag module.

NOTE:
Make sure the audio remote control switch and the airbag module connectors are plugged in properly.