Scantool Diagnostics

Electronic Stability Control
C1235 Primary Pressure Sensor-Electrical - Monitor Scantool Data

Monitor Scantool Data

1. Connect scantool to Data Link Connector (DLC).
2. Ignition "ON" & Engine "ON".
3. Press the brake pedal.
4. Monitor the "Pressure Sensor " parameter on the Scantool.

Specification : Approx. 60bar ~150bar (There is difference in displayed parameter according to braking force)




Fig 1) Test Condition : Ignition "ON" & Engine "ON".
Normal data (There is difference in displayed parameter according to braking force)
5. Whenever brake pedal is pushed down, is the pressure sensor's scantool data changed?