Monitor Actuation Test

Electronic Stability Control
C2372 Electronic Shuttle Valve Primary (HSV1) Error - Monitor Actuation Test

Monitor Actuation Test

1. Connect scantool to Data Link Connector (DLC)
2. Ignition "ON" & Engine "OFF".
3. Select the "Actuation Test" mode on the scantool.
4. Inspect operating status of ESC (ESP) valve #1 with Actuation Test.

Specification : It's normal if operating sound is heard.




Fig.1) Test Condition : Ignition "ON" & Engine "OFF".
Ex) Actuation Test on ESC (ESP) valve #1
5. Does a ESC (ESP) valve #1 operate normally?