Parking Assist Warning Indicator: Service and Repair

Inspection

Test the buzzer by connecting battery voltage to the 1 terminal and ground the 2 terminal.
The buzzer should make a sound. If the buzzer fails to make a sound, replace it.

Replacement

1. Disconnect the negative (-) battery terminal.
2. Remove the center console upper cover (A).





3. Remove the center facia lower tray (A) after loosening 2 screws and disconnecting the connectors.




4. Remove the buzzer (A) after loosening the nut and disconnecting the 2P connector.




5. Installation is the reverse of removal procedure.