Scantool Diagnostics

Adaptive Front Lighting System
B1603 CAN Communication Bus Off - Scantool Diagnostics

Monitor Scantool Data

1. Connect scantool to Data Link Connector (DLC).
2. Engine "ON" and Head lamp"ON".
3. Monitor the "CAN" parameters on the scantool.
(Check the data of AFLS with TCM, ECM, ECS, ESC, Steering angle sensor, EHPS, SCC, Airbag ECU, EPB, Cluster, LDWS, Camera module, PSB LH, PSB RH system and confirm output values related to CAN communication).




Fig.1) Engine "ON" - AFLS's current data (CAN Data)
4. Is parameter displayed within specifications?