W/Harness Inspection

Pre-safe Seat Belt-Left
C120F Message Count or Checksum not correct - W/Harness Inspection

Terminal & Connector Inspection

1. Many malfunctions in the electrical system are caused by poor harness and terminals.
Faults can also be caused by interference from other electrical systems, and mechanical or chemical damage
2. Thoroughly check connectors for looseness, poor connection, bending, corrosion, contamination, deterioration, or damage.
3. Has a problem been found?






PSB-LH Actuation Test

1. IG "ON" & ENG "OFF"
2. After connect GDS, select "Current Date" menu.
3. Buckled driver seat belt and select "actuation test" mode.
4. Execute "actuation test" at PSB LH

Specification : PSB LH Actuation test is success within specific working.




Fig.1) PSB-LH actuation test successful states at Driver seat belt buckled after (KEY ON)
5. Is PSB LH motor working normal?