W/Harness Inspection

Electronic Control Suspension
C1250 Height Sensor Supply Voltage Failure - RH - W/Harness Inspection

Terminal and Connector Inspection

1. Many malfunctions in the electrical system are caused by poor harness(es) and terminal condition.
Faults can also be caused by interference from other electrical systems, and mechanical or chemical damage.
2. Thoroughly check connectors for looseness, poor connection, bending, corrosion, contamination, deterioration, or damage.
3. Has a problem been found?






Power Circuit Inspection

Check for open/short
1. IG "ON"
2. Disconnect right height sensor connector and pressure sensor connector.
3. Measure voltage between power terminal of right height sensor harness connector and chassis ground.
4. Measure voltage between power terminal of pressure sensor harness connector and chassis ground.

Specification : Approx. 5 V








5. Is the measured value within specifications?