General Information

Electric Parking Brake
C1613 CAN signal error ECM (Check ECM) - General Information

Component Location





General Description

The EPB is the acronym for Electric Parking Brake system. This system is the parking brake device which is used instead of the conventional hand-break system. When a driver presses the EPB button, the button signal is delivered to the EPB ECU and then the EPB actuator which consists of a motor and a gears is activated. At this time, while the motor in the EPB actuator rotates, the motor pulls the EPB cable connected to the rear wheels. The EPB ECU needs various different signals from many sensors or other control modules. These signals are delivered to the EPB ECU through CAN communication line.

DTC Description

The EPB ECU monitors CAN messages for a normal operation and if the abnormal messages from ECM are detected, this DTC is set.

DTC Detecting Condition





Diagnostic Circuit Diagram