W/Harness Inspection

Electronic Control Suspension
C1642 CAN signal error ESC (ESP) - W/Harness Inspection

Terminal and Connector Inspection

1. Many malfunctions in the electrical system are caused by poor harness(es) and terminal condition.
Faults can also be caused by interference from other electrical systems, and mechanical or chemical damage.
2. Thoroughly check connectors for looseness, poor connection, bending, corrosion, contamination, deterioration, or damage.
3. Has a problem been found?






CAN Communication line Inspection

Check CAN communication line
1. IG "OFF"
2. Disconnect HECU connector and ECS ECU connector.
3. Measure resistance between CAN-High terminal of HECU harness connector and CAN-High terminal of ECS ECU harness connector.
4. Measure resistance between CAN-Low terminal of HECU harness connector and CAN-Low terminal of ECS ECU harness connector.

Specification : Below approx. 1 Ohms




5. Is the measured value within specification?