W/Harness Inspection

Electronic Hydraulic Power Steering System
C1699 ECS CAN Signal Error - W/Harness Inspection

Terminal and Connector Inspection

1. Many malfunctions in the electrical system are caused by poor harness and terminals.
Faults can also be caused by interference from other electrical systems, and mechanical or chemical damage.
2. Thoroughly check all connectors (and connections) for looseness, bending, corrosion, contamination, deterioration, and/or damage.
3. Has a problem been found?






CAN communication circuit inspection

CAN communication circuit inspection (EHPS <-> ECS ECU)
1. Ignition "OFF"
2. Disconnect EHPS ECU connector and ECS ECU connector
3. Measure the resistance between CAN-HIGH terminal of EHPS ECU harness connector and CAN-HIGH terminal of ECS ECU harness connector.
4. Measure the resistance between CAN-LOW terminal of EHPS ECU harness connector and CAN-LOW terminal of ECS ECU harness connector.

Specification : below 1 Ohms




5. Is the measured resistance within specification?