Component Inspection

Engine Control
P0336 Crankshaft Position Sensor 'A' Circuit Range/Performance - Component Inspection

Component Inspection

Visually check CKPS and target wheel
1. IG "OFF".
2. Check CKPS and target wheel for deformation or damage visually.
3. Is the above items normal?





Check signal waveform of CKPS
1. IG "OFF" and connect GDS.
2. ENG "ON" and Measure signal waveform at signal terminal of CMPS.
3. Measure signal waveform at signal terminal of CKPS.

Specification : Refer to Signal Waveform & Data




4. Is the measured signal waveforms of CKPS/CMPS normal?