Scantool Diagnostics

Engine Control
P2106 Limp Home Mode - Force Limited Power - Scantool Diagnostics

Monitor GDS Data

1. Connect GDS to DLC (Data Link Connector)
2. IG "ON" & Monitor that any different DTC (Diagnostic Trouble Code) is existed.
(There will be at least one more DTC which causes this DTC P2106 to retrieve)
3. Repair the DTCs cause DTC P2106 first according to the designated trouble shooting guide.
(After repairing the DTCs cause DTC P2106, don't forget to do "ETC Initialization" as follows.)
4. Is the same DTC occurred?