Repair Procedures

Replacement

Front Seat Belt Replacement

CAUTION:
- When installing the front seat belt, make sure not to damage the pretensioner.

1. Remove the following items fist:
A. Front seat assembly.
B. Front door scuff trim and Rear door scuff trim.
2. Disconnect the battery negative cable, and wait for at least three minutes before beginning work.
3. Using a flat-trip screwdriver, remove the seat belt anchor pretensioner (A).




4. Remove the center pillar lower trim (A).




5. Remove the center pillar upper trim (A).




6. Loosen the mounting bolt, then remove the upper anchor (A).

Tightening torque :
39.2 - 53.9 N.m (4.0 - 5.5 kgf.m, 28.9 - 39.8 lb-ft)




7. Disconnect the seat belt pretensioner connector (A) and PSB connector (B).




8. Loosen the seat belt pretensioner mounting bolt and remove the seat belt pretensioner (A).

Tightening torque :
Bolt : 39.2 - 53.9 N.m (4.0 - 5.5 kgf.m, 28.9 - 39.8 lb-ft)




9. Loosen the mounting bolt, then remove the seat belt guide bracket (A).




10. Installation is the reverse of removal.

Height Adjuster Replacement
1. Remove the following items first:
A. Front door scuff trim and rear door scuff trim
B. Front seat belt upper, lower anchor
C. Center pillar lower trim
D. Center pillar upper trim
2. Remove the height adjuster (A).

Tightening torque :
39.2 - 53.9 N.m (4.0 - 5.5 kgf.m, 28.9 - 39.8 lb-ft)




3. Installation is the reverse of removal.

Front Seat Belt Buckle Replacement
1. Remove the following items first:
A. Front seat assembly
2. Remove the seat belt buckle (A).

Tightening torque :
39.2 - 53.9 N.m (4.0 - 5.5 kgf.m, 28.9 - 39.8 lb-ft)




3. Installation is the reverse of removal.