Front

Brake Disc Thickness

Standard 30 mm (1.181 in)
Service limit 28.4 mm (1.118 in)
Deviation Less than 0.005 mm (0.0002 in)

Brake Disc Runout

Limit 0.03 mm (0.0012 in.) or less (new one)

If the runout of the brake disc exceeds the limit specification, reinstall the disc after turning the disc 72° clockwise. Recheck the runout. If the runout exceeds the specification, try turning the disc by 72° and recheck the runout until a full revolution(360°, 4 steps)