Rear Assist Arm

Replacement

1. Remove the rear wheel & tire.

Tightening torque :
88.3 - 107.9N.m (9.0 - 11.0kgf.m, 65.1 - 79.6lb-ft)

2. Disconnect the rear assist arm (A) from the rear axle by loosening the split pin & nut.

Tightening torque :
107.9 - 117.7N.m (11.0 - 12.0kgf.m, 79.6 - 86.8lb-ft)




3. Disconnect the rear assist arm (A) from the rear carrier using a SST (09568-2J100).




4. Disconnect the rear assist arm (A) from the rear sub frame by loosening the bolt & nut.

Tightening torque :
78.5 - 88.3N.m (8.0 - 9.0kgf.m, 57.9 - 65.1lb-ft)




5. Installation is the reverse of removal.
6. Check the alignment.