Scantool Diagnostics

Automatic Transaxle

P0708 Transmission Range Sensor Circuit High Input - Scantool Diagnostics

Monitor Scantool Data

1. Connect scantool to Diagnostic Connector.
2. Ignition "ON" & Engine "OFF"
3. Monitor the "Inhibitor Switch" parameter on the scan tool
4. Shift to D range from P range with selector lever.




































Fig 1) 1st gear in D range
Fig 2) 2nd gear in D range
Fig 3) 3rd gear in D range
Fig 4) 4th gear in D range
Fig 5) 5th gear in D range
Fig 6) 6th gear in D range
Fig 7) P range
Fig 8) R range
Fig 9) N range
5. Is the "Inhibitor Switch" operating normal?