General Information

Automatic Transaxle

P0713 Transmission Fluid Temperature Sensor 'A' Circuit High Input - General Information

Component Location





General Description

The automatic TRANSAXLE fluid (ATF) temperature sensor is installed in the Valve Body. This sensor uses a thermistor whose resistance changes according to the temperature changes. The TCM supplies a 5 V reference voltage to the sensor, and the output voltage of the sensor changes when the ATF temperature varies. The automatic TRANSAXLE fluid (ATF) temperature provides very important data for the TCM's control of the Torque Converter Clutch, and is also used for many other purposes.

DTC Description

TCM sets this DTC when ATF temperature sensor has been detected below -43 °C (-45.4 °F), voltage is approximately 5 V, for 12 seconds. The TCM regards the ATF temperature as fixed at a value of 80 °C (176 °F).
(MIL : 1 Driving Cycle)

DTC Detecting Condition





Specification





Diagnostic Circuit Diagram





Signal Waveform & Data












Fig 1) Normal
Fig 2) Open or Short to battery
Fig 3) Short to ground