W/Harness Inspection

Automatic Transaxle

P0967 Clutch Pressure Control Solenoid Valve Circuit High (SL2) - W/Harness Inspection

Terminal and Connector Inspection

1. Many malfunctions in the electrical system are caused by poor harness and terminals. Faults can also be caused by interference from other electrical systems, and mechanical or chemical damage.
2. Thoroughly check connectors for looseness, poor connection, bending, corrosion, contamination, deterioration, or damage.
3. Has a problem been found?






Signal Circuit Inspection

1. Engine "OFF" IG KEY "OFF".
2. Disconnect solenoid valve connector.
3. Engine "OFF" IG KEY "ON"
4. Measure voltage between "Clutch pressure control solenoid valve (SL2)" terminal and chassis ground.

Specification : Approx. 2 V








5. Is voltage within specifications?






Ground Circuit Inspection

1. Engine "OFF" IG KEY "OFF".
2. Disconnect solenoid valve connector.
3. Measure voltage between Ground terminal of "Clutch pressure control solenoid valve (SL2)" and chassis ground.

Specification : 2 V








4. Is voltage within specifications?