Repair procedures

Removal and Installation

1. Remove the front bumper.
2. Unfasten the 2 bolts (A) and release locking hook (B).








3. Disconnect the AAF (Active air flap) actuator connector (A).




4. Remove the AAF (Active air flap) assembly (A).




5. Installation is the reverse of removal.
6. After installing, perform the "Actuation test" using GSD to check on the system.






Disassembly

1. Remove the link (A) from the housing (B).




2. Remove the actuator (A) from the housing (B).




3. Remove the flaps (A) from the housing (B).




4. Assembly is the reverse of disassembly.

NOTE:
When assembling, the links and flaps should be in full open position.