Parking Assist Control Module: Service and Repair

Removal

1. Disconnect the negative (-) battery terminal.
2. Remove the crash pad lower panel (A).

[LHD]





[RHD]




3. Remove the reinforce panel after loosening the mounting bolts.
4. Remove the body control module after loosening nut (1EA) and screw (1EA) and disconnecting the connectors (A).




5. In case of RHD, remove the body control module after loosening nuts (2EA) and disconnecting the connectors (A).






Installation

1. Install the body control module.
2. Install the reinforce panel.
3. Install the crash pad lower panel.