Scantool Diagnosis

Motor driven Power Steering
C1290 Torque Sensor Signal Error - Scantool Diagnosis:_:Monitor Scantool Data

Monitor Scantool Data

1. Connect scantool to Data Link Connector(DLC)
2. Ignition "ON" & Engine "ON".
3. Turn the steering wheel to the left or right.
4. Monitor the "Stering Whel Torque" parameters on the Scantool.

Specification :Approx. 8 - 8Nm.




5. Whenever steering wheel is turned, is the steering sensor's scantool data changed?