Component Inspection

Electronic Stability Control
C1513 Brake Switch Error - Inspection/Repair:_:Component Inspection

Component Inspection

Brake light switch Check
1. Ignition "OFF" & Engine "OFF".
2. Disconnect the brake light switch connector.
3. Measure resistance between power terminal and siganl terminal of the brake light switch A, B connector.

Specification :Resistance between terminals of the brake light switch A - InfinityOhms (when the plunger is pushed down), 0Ohms (when the plunger isn't pushed down).
Resistance between the terminals of the brake light switch B - InfinityOhms (when the plunger is not pushed down), 0Ohms (when the plunger is pushed down).




4. Is the measured value within specifications?