Monitor Actuation Test

Electronic Stability Control
C2312 Front-LH Valve error (Outlet Valve) - Scantool Diagnostics:_:Monitor Actuation Test

Monitor Actuation Test

1. Connect scantool to Data Link Connector(DLC)
2. Ignition "ON" & Engine "OFF".
3. Select the "Actuation Test" mode on the scantool.
4. Inspect opearating status of Front left valve(out) with Actuation Test.

Specification :It's normal if operating sound is heard.




Fig.1) Test Condition : Ignition "ON" & Engine "OFF".
Ex) Actuation Test on Front left valve(out)
5. Does a Front left valve(out) operate normally?