Crankshaft Main Bearing

Main Bearing

Install main bearing cap bolts.

NOTE:
- The main bearing cap bolts are tightened in 2 progressive steps.
- Always use new main bearing cap bolts.

1. Apply a light coat of engine oil on the threads and under the bearing cap bolts.
2. Install and uniformly tighten the 10 bearing cap bolts(A), in several passes, in the sequence shown.

Tightening torque 27.5 - 31.4 Nm (2.8 - 3.2 kgf.m, 20.3 - 23.1 lb-ft) + 60 - 64°







Crankshaft







Main Bearing Size Codes

Place Of Identification Mark (Crankshaft Bearing)







Discrimination Of Crankshaft Bearing







Selection